Table des Matières
Publicité
●
E
●
K1
8
●
I
●
K2
FIG. 1
●
K1
●
H
●
I
FIG. 2
●
G
●
K2
●
H
FIG. 16
FIG. 3
ENGLISH
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner completely before using.
CAUTION: Moving parts, make sure the on/off switch is in the off
position and stay clear of the brushroll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Remove all components from the carton and check that all of the parts are
available from the parts list on page 6 (or see the quick start guide).
Have a Phillips screwdriver available (one is NOT provided in the package)
Step 1: Assemble the rear housing
of the base and attaching to the base using a long screw provided
●
K2
(FIG. 1).
Step 2: Attach the tool caddy
sliding it onto the housing, and then attach using the 2 short
●
screws
K1
provided (FIG. 2).
●
Step 3: Attach the handle
G
to top of tool caddy
and then securing with a long screw
(CONTINUED)
●
●
I
E
to the base
by sliding it on top
●
H
to the top of the rear housing
●
H
by sliding it downward
●
K2
(FIG. 3).
●
I
by
Publicité
Table des Matières
