Indications And Displays On The Transmitter; Indications And Displays On The Receiver - Sennheiser eW 300 IEM G2 Notice D'emploi

Indications and displays on the transmitter

Modulation display
The level display for audio signal "AF" shows the modulation of the
transmitter.
When the transmitter's audio input level is excessively high, the level display
for audio signal "AF" shows full deflection.
When the transmitter is overmodulated frequently or for an extended period
of time, the text "PEAK" (backlit in red) flashes in alternation with the
standard display.
Button backlighting
During standby operation, the
transmitter is switched on, the
additionally backlit in green.

Indications and displays on the receiver

Operation and battery status indication
The red LED (LOW BAT/ON)
state of the receiver:
Red LED lit up: The receiver is switched on and the capacity of the
batteries/BA 2015 accupack is sufficient.
Red LED flashing: The batteries are/the BA 2015 accupack is going flat
(LOW BAT)!
In addition, the 4-step battery status display
information on the remaining battery/BA 2015 accupack capacity:
3 segments:
2 segments:
1 segment:
Battery icon flashing:
Modulation display of the received transmitter
The level display for audio signal "AF" shows the modulation of the received
transmitter.
When the transmitter's audio input level is excessively high (AF peak), the
receiver's level display for audio signal "AF" shows full deflection.
ON button is backlit in red. When the
SET button and the
provides information on the current operating
on the display panel provides
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT
/ button are
9