Electrical Information; Identification Of Parts; Accessories - INVENTOR EPC-09 Mode D'emploi

IDENTIFICATION OF PARTS

For your safety
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
• Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any
prong from the power cord.
WARNING

Electrical Information

• Be sure the electrical service is adequate for the model you have chosen. This information can be found on the
serial plate, which is located on the side of the unit, behind the grill.
• Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is im-
portant. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.
• Your air conditioner must be used in a properly grounded wall outlet. If the wall outlet you intend to use is not
adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the
proper outlet.
• Ensure the outlet is accessible after the unit installation.

Accessories

PARTS
or
NOTE: Optional parts (*), some models without.
• Check that all the accessories are included and please refer to the installation instructions for their usage.
NOTE: All the illustrations in this manual are for explanatory purposes only. Your air conditioner may be
slightly different. The actual shape and size may vary.
PARTS NAME:
Exhaust hose (supplied), adapter
B (round mouth or flat month: de-
pending on models) and Window
Slider Kit and bolt (*)
Adaptor B (round mouth) (*)
Wall Exhaust Adaptor A ( *)
Expansion Plug and wooden
screw (*)
Foam seal (*)
Remote Controller and Battery
(For remote control models only)
Drain hose
6
QUANTITY :
1 set
1 set
1 pc
4/ pc
3/pc
1set
1pc