Philips AVENT SCF393/71 Manuel D'utilisation page 8

English
8
- Only use the adapter (S009AHz050yyyy) provided with this
breast pump.
- Always ensure that it is easy to disconnect the device from the
mains in case of malfunction. The adapter is considered the
disconnection device.
Warnings to avoid contamination and to ensure hygiene:
- For hygienic reasons, the breast pump is only intended for
repeated use by a single user.
- Clean and disinfect all parts before first use and after each use.
- Do not use antibacterial or abrasive cleaning agents to clean the
breast pump parts as this may cause damage.
- Wash your hands thoroughly with soap and water before you
touch breast pump parts and breasts to prevent contamination.
Avoid touching the inside of containers or lids.
Warnings to avoid breast and nipple problems including pain:
- Do not use the breast pump if the silicone diaphragm appears to
be damaged or broken. See chapter 'Ordering accessories' for
information on how to obtain replacement parts.
- Only use accessories and parts recommended by Philips Avent.
- There are no user serviceable parts inside the motor unit of the
breast pump.
- No modification of the breast pump is allowed. If you do so, your
warranty becomes invalid.
- Never use the breast pump while you are sleepy or drowsy to
avoid lack of attention during use.
- Always switch off the breast pump before you remove the pump
body from your breast, in order to release the vacuum.
- If the vacuum is uncomfortable or causes pain, switch off and
remove the breast pump from your breast.
- Do not continue pumping for more than five minutes at a time if
you do not succeed in expressing any milk. Try to express at
another time during the day.