Philips AVENT SCF393/71 Manuel D'utilisation page 14

English
14
Note: Correct placement of the cushion, silicone diaphragm and silicone tube is essential for the
breast pump to form a proper vacuum.
1. Wash your hands
thoroughly with soap
and water.
4A. Push the inner part
of the cushion into the
funnel against the line
(indicated with an
arrow).
7. Connect the tube(s)
to the motor unit.
2. Push the white valve
in the pump body as far
as possible.
5. Place the silicone
diaphragm in the pump
body.
8. Insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
3. Screw the pump body
onto the bottle.
5A. Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down with
your thumbs.
9. The breast pump is
now ready for use.
4. Place the cushion in
the pump body and
make sure that the rim
covers the pump body.
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap
until it is securely in
place.
Note: You can place
the cover over the
cushion to keep the
breast pump clean
when you take it with
you and while you are
preparing for
expressing.