Publicité
Les langues disponibles
Les langues disponibles
User's manual and safety instructions of the unique,
Keep this user's manual carefully for the life of this product. This product is only to be
sold in combination with this user's manual.
Please read the below instructions thoroughly before putting your Ruby Fires Bio Flame Burner® to
use. Make sure that the guidelines as provided are followed.
The Ruby Fires Bio Flame Burner® is meant for inside use only. The recommended temperature
radius: 10°C until 25°C. The Ruby Fires Bio Flame Burner® can only be used by people of age, who
are competent and who have read and understood these user's manual and safety instructions.
Installation of the Bio Flame Burner®
The Bio Flame Burner® is to be placed or hung on a fireproof foundation or wall.
When attaching to a wall, we advise you to keep a safety distance of 1 cm from the wall.
Never remove the isolation layer on the backside.
Make sure that the Bio Flame Burner® is levelled, when placed/hung horizontally as well as
vertically. This to make sure that the liquid cannot run out of the burner.
Keep a safety distance of at least 1 meter (on both the left-, right- and frontside) for objects.
Keep flammable objects (e.g. curtains, furniture or bookshelves) away from the Bio Flame
Burner®.
Risk of fire!
Do not place the Bio Flame Burner® next to, underneath or on top of a windowsill.
Use the Bio Flame Burner® only in a draft-free room, otherwise soot can come to being.
However, it is important to have some form of ventilation.
Ruby Fires delivers its own unique fuel: Ruby Fires bio ethanol 98%. The Bio Flame Burner®
can only function optimally in combination with this Ruby Fires bio ethanol 98%. Never use
another liquid or gel to refill the Bio Flame Burner®, the ceramic brick on the inside of the
burner can then be blocked/damaged, which will cause the flames to be of less quality. As a
consequence, the warranty will expire as well.
Installation of the enclosed strap
We advise you to use the enclosed strap in case no decoration material is used. This can be
attached to the top of front of the burner with the enclosed magnets (small side under). This
way the flames are prevented to hit the back of the insert.
Installation in a Ruby Fires surround:
Place the Bio Flame Burner® in the insert (make sure this is levelled)
Installation in an existing fireplace:
Place the Bio Flame Burner® in the therefore appointed space (make sure this is levelled)
Minimum distance necessary from the top of the burner: 50 cm.
Installation of the logset/pebbles
Ruby Fires has developed a special ceramic logset and pebbles for decoration purposes of the
Bio Flame Burner®. Place these around the fire opening (the (white) ceramic brick) of the
burner. The fire opening should be remained free. When the decoration material is placed in
the flames, unnecessary soot will be formed. Do not touch the decoration material until this
has cooled down for at least 30 minutes.
For safety reasons never use any other decoration material for the Bio Flame Burner® besides
the Ruby Fires ceramic logset or pebbles.
Filling the Bio Flame Burner® with Ruby Fires bio ethanol 98%
Use Ruby Fires bio ethanol 98% ONLY to fill the Bio Flame Burner®
patented Ruby Fires Bio Flame Burner®
Risk of fire!
Risk of burns!
Risk of fire!
Risk of fire!
Risk of fire!
Risk of fire!
Publicité
