Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SETTING UP THE APPLIANCE
o
Uncoil the supply cable and make sure that it does not come into contact with
the appliance. Use three- phase extension cables only.
o
The appliance must be placed at a distance of at least 0.5 metres from the
nearest furniture and walls. Make sure that the distance to the outlet grille is at
least 1.0 m.
o
Never place the heater on long pile carpets.
SETTING UP THE APPLIANCE
o
Plug in the appliance and switch on
the power button (The power button
is located on the back of the base).
Once the appliance has been switched
on, the "power" LED lamp in the
"MODE" control panel (5) will light up.
o
Start operation by pressing the rotary
knob (1).
o
The display (4) indicates the current
room temperature and the appliance
will start to heat the room in "high"
mode (1,800 W).
o
You can change the mode to "low", "auto" or back to "high" by pressing the
"MODE/SET TIME" button (2). The LED lamp for the selected mode will light up
in the "MODE" control panel (5).
Auto mode
o
In contrast to the "high" (1,800W) and "low" (900W) modes, the temperature
can be controlled in the auto mode (the appliance will heat at 1,800W in auto
mode).
o
Use the "MODE/SET TIME" button (2) to switch the appliance to "auto".
o
Turn the rotary knob (1) until the desired temperature appears on the display
(4).
o
As soon as the desired temperature has been reached, the appliance
automatically switches off. If the room temperature is +/-1°C below
the selected temperature, the appliance will switch back on.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
26
Publicité
Table des Matières
