Philips AVENT SCF397 Mode D'emploi page 13

1. Wash your hands
thoroughly with soap
and water.
4A Push the inner part of
the cushion into the
funnel against the line
(indicated with an
arrow).
7. Connect the tube(s) to
the motor unit.
2. Push the white valve
in the pump body as far
as possible.
5. Place the silicone
diaphragm in the pump
body.
8. Insert the adapter into
the wall socket and
insert the plug at the
other end into the motor
unit.
3. Screw the pump body
onto the bottle.
5A Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down with
your thumbs.
9. The breast pump is
now ready for use.
English
4. Place the cushion in
the pump body and
make sure that the rim
covers the pump body.
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap until
it is securely in place.
Note: You can place
the cover over the
cushion to keep the
breast pump clean
while you are preparing
for expressing.
13