Declarations Of Conformity - Dreve Labormat SD Mode D'emploi

Labormat SD

4. Declarations of conformity

4.1 Labormat SD
Low-Voltage Directive (2014 / 35 / EG)
Herewith we declare that the machine described below in its conception and design and in the
shape delivered by us is in accordance with the fundamental requirements for safety and health
as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorised by us, this declaration
becomes invalid.
Denomination of the machine:
Labormat SD (D3601)
Type of machine: Boiling-out unit – standing model
The following additional EC directives were applied:
2014 / 30 / EU EMV Directive
The protection objectives of EC Directive 2014 / 35 / EU are complied with.
The following harmonized standards have been applied:
2014 / 35 / EU Low Voltage Directive
EN 61010-1:2010 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements (IEC
61010-1:2010 + Cor.:2011); German version EN 61010-1:2010.
EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-010: Particular requirements
for laboratory equipment for the heating of materials (IEC 61010-
2-010:2014); German version EN 61010-2-010:2014.
2014 / 30 / EU EMC Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment imput current <= 16 A
per phase) (IEC 61000-3-2:2014); German version EN 61000-3-
2:2014.
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation
of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems, for equipment with rated current <=16 A
per phase and not subject to conditional connection (IEC 61000-3-
3:2013); German version EN 61000-3-3:2013.
EN 61326:1:2013 Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 1: General requirements (IEC 61326-
1:2012); German version EN 61326-1:2013 Emission according to
living area, business and industrial undertakings as well as small
enterprises interference stability according to industrial area.
EN 55014-1:2006 Measurement of interference voltage according to EN55014-1:
A1:2009 + A2:2011 2006 frequency range 150kHz–30MHz Conducted interference
emission, particular evaluation of click noise interferences – Part
1: Emission (CISPR 14-1:2005 + A1:2008 + Cor.:2009 + A2:2011);
German version EN 55014-1:2006 + A1:2009 + A2:2011.
Dreve Dentamid GmbH
Max-Planck-Straße 31 59423 Unna/Germany
•
40
www.dentamid.dreve.de
•
4.2 Labormat SD, USA
Low Voltage Directive (2014 / 35 / EU)
Herewith we declare that the machine described below in its conception and design and in the
shape delivered by us is in accordance with the fundamental requirements for safety and health
as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorised by us, this declaration
becomes invalid.
Denomination of the machine:
Labormat SD (D3601USA)
Type of machine: Boiling-out unit – standing model
The following additional EC directives were applied:
2014 / 30 / EU EMV Directive
The protection objectives of EC Directive 2014 / 35 / EU are complied with.
The following harmonized standards have been applied:
2014 / 35 / EU Low-Voltage Directive
EN 61010-1: 2010 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements (IEC
61010-1:2010 + Cor.:2011); German version EN 61010-1:2010.
EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-010: Particular requirements
for laboratory equipment for the heating of materials (IEC 61010-
2-010:2014); German version EN 61010-2-010:2014.
2014 / 30 / EU EMC Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment imput current <= 16 A per
phase) (IEC 61000-3-2:2014); German version EN 61000-3-2:2014.
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits - Limitation
of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems, for equipment with rated current <=16 A
per phase and not subject to conditional connection (IEC 61000-3-
3:2013); German version EN 61000-3-3:2013.
EN 61326:1:2013 Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 1: General requirements (IEC 61326-
1:2012); German version EN 61326-1:2013 Emission according to
living area, business and industrial undertakings as well as small
enterprises interference stability according to industrial area.
EN 55014-1:2006 Measurement of interference voltage according to EN55014-1:
A1:2009 + A2:2011 2006 frequency range 150kHz–30MHz Conducted interference
emission, particular evaluation of click noise interferences – Part
1: Emission (CISPR 14-1:2005 + A1:2008 + Cor.:2009 + A2:2011);
German version EN 55014-1:2006 + A1:2009 + A2:2011.
Dreve Dentamid GmbH
Max-Planck-Straße 31 59423 Unna/Germany
•
www.dentamid.dreve.de
•
41