Declaration Of Conformity - Dreve Drufosmart Mode D'emploi

Drufosmart

3. Declaration of Conformity

According to Machinery Directive (2006/42/EC)
Herewith we declare that the machine described below is in its conception and design and in
the shape delivered by us in accordance with the fundamental requirement for safety and health
as prescribed in the applicable EC-guidelines. In the case of any change or modification of the
machine not authorised by us this declaration becomes invalid.
Designation of machine:
Type of machine:
Applicable EC directives:
2006/42/EC
2006/95/EC
2004/108/EC
Applied harmonised standards:
2006/42/EC
EN ISO 12100:2010
EN ISO 13732-1:2008
EN 60204-1:2006/A 1:2009
2006/95/EC
EN 61010-1:2010
2004/108/EC
EN 61000-3-2:2006 +
A1:2009 + A2:2009
EN 61000-3-3:2008
EN 61326-1:2006
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · E-mail: info@dreve.de · www.dreve.com
24
Drufosmart
D-3200/D-3200-A/D-32001/D-32001-A
Pressure thermoforming unit
Machinery Directive
Low Voltage Directive
EMV Directive
According to Machinery Directive
Safety of machinery – General principles for design – Risk
assessment and risk reduction (ISO 12100:2010); German version
EN ISO 12100:2010.
Ergonomics of the thermal environment – Methods for the
assessment of human responses to contact with surfaces –
Part 1: Hot surfaces (ISO 13732-1:2006); German version
EN ISO 13732-1:2008-12.
Safety of machinery – Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:2005/A1:2008);
German version EN 60204-1:2006/A1:2009.
Low Voltage Directive
Safety requirements for electrical for measurement, control and
Iaboratory use – Part 1: General requirements (IEC 61010-1:210
+ Cor.: 2011); German version EN 61010-1:2010.
Low EMV Directive
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current <= 16 A
per phase) (IEC 61000-3-2 :2005 + A1:2008 + A2:2009);
German version EN 61000-3-2:2006 + A1:2009 + A2:2009.
Electromagnetic compatibility (EMC) - Part 3-3: Limits Limitation
of voItage changes, voItage fluctuations and flicker in
public Iow-voltage supply systems, for equipment with
rated current <= 16 A per phase and not subject to
conditinoal connection (IEC 61000-3-3:2008; German version
EN 61000-3-3:2008.
Electrical equipment for measurement, control and laboratory
use – EMC requirements; Part 1: General requirements (IEC 61326-1:
2005); German version EN 61326-1:2006. Emission according
to living area, busness and industrial undertakings as well as small
enterprises; interference stability according to industrial area.