Safety Advice - Dreve Drufosmart Mode D'emploi

4. Safety advice

Attention! Read the following notes before connecting and putting the unit into
service. The operating service and the function of the unit can only be guaranteed for,
if the general safety and accident prevention instructions of the legislation as well as
the safety instructions of the working instructions are observed.
1. This unit must only be used accord-
ing to the present working instructions.
We cannot be held liable for damages
which have been caused by improper
treatment resp. faulty manners of oper-
ation.
2. Put the unit on a stable and even
basis which is suitable for the operation
weight of approx. 16 kg of the unit.
3. In order to avoid the intrusion of
water into the unit (e. g. splash water)
the unit is to be placed into a dry sur-
rounding.
4. Do not store any flammable sub-
stances in the close surrounding of
the unit.
5. The indicated voltage on the type
plate has to meet the voltage of the
power source.
6. The unit must only be connected
with a socket with protective conductor.
Never touch the plug with wet hands.
7. Authorised operators: The operating
company of the machine has to hold
the working instructions at the oper-
ators' disposal and has to make sure
that authorised operators have read
and understood the manual. Only in
that case the operators may operate
the unit.
8. The unit has to be examined before
operation in view of proper condition
and operating safety. If the unit is not
in proper condition, it must not be used
and has to be marked accordingly.
9. The pressure of the compressed air
line must not exceed 10 bars.
10. Do not intrude any objects into
the unit.
11. Do not lock-up the operation ele-
ments of the unit.
12. Do not block the downwards-mov-
ing piston.
13. Do not touch the downwards-mov-
ing piston.
14. The swivelling housing of the radia-
tor reaches high temperatures and must
therefore not be touched – not even for
short moments.
15. If the unit is not used, please dis-
connect the mains.
25