Bluetooth® Audio Playback - Renault Radio Connect R&Go Mode D'emploi

AUXILIARY AUDIO SOURCES
Jack connection
Connection
Using a suitable cable (not provided),
connect the Jack socket of the auxil-
iary input 13 on the audio system front
panel to your portable audio player
headphones plug (usually a 3.5 mm
jack Jack).
Note: you cannot select a track directly
from your audio system. To select a
track, you must do so directly via your
portable audio player, when the vehicle
is stationary.
Use
Just the text "AUX" is displayed on the
audio system screen. No artist or track
name is visible.
Note: To adjust the sensitivity of the
Jack, socket, refer to the "System set-
tings" section.
GB.22
(2/4)
Bluetooth® audio playback
In order to use a Bluetooth® digital
device, you must pair it to the vehicle
when it is first used (refer to the infor-
mation on the "Bluetooth® function" in
the "General description" section).
Pairing allows the audio system to re-
cognise and store a Bluetooth® digital
device.
Note: if your Bluetooth® digital device
has telephone and portable audio
player functions, pairing one of these
functions will automatically pair the
other.
Only handle the personal
stereo when traffic condi-
tions permit.
Store the portable audio
player safely while driving (risk of
being thrown in the event of sudden
braking or impact).
Connection
For a device already paired, perform
the following steps:
– enable Bluetooth® on the portable
audio player and make it visible to
other devices (refer to your audio
player manual);
– select the Bluetooth® audio source
by pressing button 4 on the audio
system front panel or button 15 on
the steering column control.