Care And Maintenance; Cleaning Unit - Gree GJC9AG-E6RNB3A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and maintenance

Always turn off the air conditioner and main power supply before cleaning to ensure safety.

Cleaning unit

1. Cut power off before cleaning.
Plug out only after
air conditioner
stops at all.
2. Use soft dry cloth when
cleaning cabinet.
If the cabinet is very
dirty, dip cloth into warm
water below 40
the cloth and then rub off
the dirt.
3. Don't use gas, benzene, solvent,wash, chemical
solvent, etc. for cleaning.
4. Do not splash water directly into indoor
unit, in which
there are micro-
computer and
circuit plate,
they must not be
drenched with
water.
* Check earth wire
Is it broken
or loose?
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Dry the cloth by
h a n d s b e f o r e
cleaning.
dry
Accident could
happen.
Air filter
The air filter behind the intake grille should be washed at least
once every two weeks or as often as it needs cleaning.
How to clean the air filter:
1. To remove the air intake grille, grasp the tab on the filter and
pull to take out.
2. Vacuum the filter on the dusty side to remove light dust.
3. Wash the filter, cleaner side up under gently flowing water
to wash out accumulated dust and lint.
4. If the filter is very dirty, use a mild household detergent in
the wash water.
Let the filter dry thoroughly before reinstalling it.
If. necessary, please ask the professional personnel to
clean it.
* Check if air inlet and outlet of outdoor unit
are blocked or not.
Air lock could result
in bad efficiency.
10
Vacuum cleaner

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gjc12ag-e6rnb3a

Table des Matières