Noise/Vibration Information - Wurth Master HBS 533 Traduction De La Notice Originale

OBJ_BUCH-1105-001.book Page 11 Tuesday, December 8, 2009 11:03 AM
Product Features
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Auxiliary handle (insulated gripping surface)
2 Sanding belt*
3 Clamping lever for sanding belt
4 Thumbwheel for belt speed preselection
5 On/Off switch
6 Lock-on button for On/Off switch
7 Dust bag
8 Handle (insulated gripping surface)
9 Adjustment knob for belt run
10 Extraction outlet
11 Protection cover
12 Dust passage
13 Graphite plate*
14 Guide plate
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Tool Specifications
Belt Sander
Art. No.
Rated power input
Output power
No-load belt speed
Sanding belt length
Sanding belt width
Belt speed preselection
Connection for inter-
nal/external dust extrac-
tion
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given apply for nominal voltages [U] of
230/240 V.
8.12.09
Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 85 dB(A); Sound power
level 96 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
K =1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different acces-
sories or poorly maintained, the vibration emission
may differ. This may significantly increase the expo-
sure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
HBS 533
0702 588 X
W 750
W 410
m/min 200 – 330
We declare under our sole responsibility that the
mm 533
product described under "Technical Data" is in con-
mm 75
formity with the following standards or standardiza-
tion documents: EN 60745 according to the
provisions
98/37/EC (until 28 Dec 2009), 2006/42/EC (from
29 Dec 2009).
Technical file at:
Adolf Würth GmbH & Co.KG, PFW,
kg 3.4
D-74650 Künzelsau
/II
02.09.2009, Adolf Würth GmbH & Co. KG,
D-74650 Künzelsau
N. Heckmann

Noise/Vibration Information

=3 m/s
h
2
.
Declaration of Conformity
of the directives
A. Kräutle
2
, Uncertainty
2004/108/EC,
English–11