Worx LANDROID M WG794E Guide D'installation page 8

Marking out landroid
territory within your garden
Your Landroid M needs to know where to mow. This is why you have to mark its working area with a boundary wire
®
that will form an invisible fence. This wire will also guide your Landroid
If your neighbor also uses a Landroid
a space of at least 2 metres between your Boundary Wire and
your neighbors.
Please be aware that your Landroid
a signal from the Boundary Wire beyond the distance of 18m.
First of all, locate the best spot for the charging base, taking
into account where your nearest outdoor electricity socket is.
The charging base has a 15m power cord.
note: Make sure the transformer and the electrical socket
are kept in a dry area at all times.
8
EN
The charging base should be placed along a straight line-allow
2 meters at both the front and the back. If possible, place the
charging base in the shade-batteries are better recharged in a cool
place.
Make sure it is on a flat area, clear of any obstacles.
M, then you must keep
®
M will not be able to receive
®
M's
®
M to its charging base.
®
An island is an area that sits inside your lawn where you don't
want Landroid M to go. The boundary wire starts from the
®
mowing boundary, goes straight to the island, around it and
back to the boundary as shown by the arrows on the picture.