Before You Begin; Tools And Parts Needed; Parts Included; Appliance Dimensions - Bosch HUI54451UC Instructions D'installation

Before you begin

Tools and parts needed

Measuring tape
▯
Pin
▯
Phillips screwdriver (Posidrive) #2
▯
Drill with the following bits:
▯
Spirit level
▯
Aluminum tape (DO NOT use insulating tape)
▯
Exhaust air duct (configuration depends on the
▯
installation situation)
Additional sheet metal screws (if necessary for
▯
installation of the exhaust air duct)
Jigsaw
▯

Parts included

Appliance dimensions

10
B e f o r e y o u b e g i n
/ " (5 mm)
3
16

Safety clearances

The clearance between the shelf on the cooktop and the
bottom of the extractor hood may not be less than 24"
(610 mm) in the case of electric cooktops and 25
(650 mm) in case of gas or combined ranges.
If the installation instructions for the gas cooking
appliance specify a larger distance, this must be taken
into account.
/ "
3
5