Using Av Input - Pioneer AVIC-Z910DAB Manuel D'installation

External video
component

Using AV input

This product
Red, white (AUDIO INPUT) 23 cm
Yellow (VIDEO INPUT) 23 cm
RCA cable (sold separately)
To audio input
To video input
External video component (sold
separately)
NOTE
The appropriate setting is required to use
the external video component. For details,
refer to the Operation Manual.
Using an AUX input
This product
Mini-jack AV cable (CD-RM10) (sold
separately)
AUX input (AUX IN) 15 cm
Yellow
Red, white
RCA cables (sold separately)
To video output
To audio outputs
External video component (sold
separately)
NOTE
The appropriate setting is required to use
the external video component. For details,
refer to the Operation Manual.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you
use other cables, the wiring position might
differ resulting in disturbed images and
sounds.
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth
Using an HDMI input
Z910DAB
This product
HDMI port
High Speed HDMI® Cable (sold
separately)
HDMI device (sold separately)
NOTE
When you connect the High Speed HDMI®
Cable, use the lock tie to fix it securely
(page 7).
Securing the High
Speed HDMI®
Z910DAB
Be sure to fix the High Speed HDMI® Cable
with the lock tie, when you connect the
external device with the High Speed
HDMI® Cable.
1
Insert the High Speed HDMI® Cable
into the HDMI port.
2
Wrap the lock tie around the hook
above the HDMI port and the High
Speed HDMI® Cable, and then tighten
it to secure the High Speed HDMI®
Cable.
Hook
Lock tie
High Speed HDMI® Cable
CAUTION
Do not tighten up the lock tie more than
necessary.
En
7