Product Description; Using The Appliance For The First Time - Inventum AKV6004RVS Mode D'emploi

2

product description

1. Metal fat filters - 2 items
2. Position switches
3. Lighting (LED spots 2 x 3.0W)
4. Switch for the lighting
3

using the appliance for the first time

Before using the appliance for the first time, proceed as follows: carefully unpack the cooker hood and remove all packaging material.
Keep the packaging (plastic bags, polystyrene and cardboard) out of the reach of children. After unpacking the appliance, carefully
check it for external damage that may have occurred during transport. Place the appliance on a sturdy, flat surface.
The installation and electrical connection must be performed by a qualified technician, in accordance with the installation
instructions and local regulations.
How the appliance should be placed is described in the Installation Instruction - section 7.
The appliance must be connected to a properly installed earthed socket. The voltage (AC) should correspond with the voltage stated
on the information plate.
DISCHARGE SYSTEM
This cooker hood is able to discharge cooking vapours in two ways: via a direct air discharge to the outside or with recirculation.
Select how you want to use the cooker hood and install it according to the instructions.
DISCHARGE TO THE OUTSIDE - connect to a discharge channel.
The sucked in and filtered cooking vapours are discharged to the outside.
This is the recommended option.
RECIRCULATION - the fat particles and sucked in cooking vapours are filtered.
The sucked in air is not discharged, but blown back into the kitchen. You must install
carbon filters on the motor. A free outflow of the sucked in air is necessary.
Caution! The carbon filters are not a standard part of the delivery. You must order
these accessories separately. Order the accessories at your dealer or via the Inventum
parts webshop.
20
• English
4
3
1
2