General Description (Fig. 1) - Philips Sonicare AirFloss Ultra HX8331/12 Mode D'emploi

General description (Fig. 1)

1 Nozzle tip
2 AirFloss Ultra nozzle
3 Activation button
4 Reservoir and reservoir cover
5 Handle
6 Charge & burst mode indicators
- Single burst: 1 LED
- Double burst: 2 LEDs
- Triple burst: 3 LEDs
7 Power/mode button
8 Removable nozzle holder (select models)
9 Charger
Note: The contents of the box may vary based on the model purchased.
Charging
Charge the AirFloss Ultra for 24 hours before first use.
1 Put the plug of the charger in the electrical outlet.
2 Place the handle on the charger (Fig. 2).
Charging process: (Fig. 3)
,
- 1 green LED: 33% charged.
- 2 green LEDs: 66% charged.
- 3 green LEDS: 100% charged.
Note: When it is fully charged, AirFloss Ultra has an operating time of up to
11 days when it is used in triple burst mode, and up to 33 days when it is
used in single burst mode.
Note: When the charge indicators flash yellow, the battery is low and needs to
be recharged (fewer than 3 uses left).
ENGLISH
9