General Description (Fig. 1); Preparing For Use - Philips Sonicare AirFloss HX8211/02 Mode D'emploi

ENGLISH
8

General description (Fig. 1)

1 Guidance tip
2 AirFloss nozzle
3 Activation button
4 Reservoir and cover
5 Handle
6 Charge indicator
7 Power on/off button
8 Removable nozzle holder (specific types only)
9 Charger
Note: The contents of the box may vary based on the model purchased.
Charging
Charge the AirFloss for 24 hours before first use.
1 Put the plug of the charger in the wall socket.
2 Place the handle on the charger (Fig. 2).
The charge indicator flashes green to indicate that the appliance is
,
charging (Fig. 3).
Note: When it is fully charged, the AirFloss has an operating time of up to
2 weeks (or 14 uses).
Note: When the charge indicator flashes yellow, the battery is low and needs
to be recharged (fewer than 3 uses left).

Preparing for use

1 Align the nozzle so the tip faces the front of the handle and press
the nozzle down onto the handle ('click') (Fig. 4).
Note: Replace the nozzle every 6 months for optimal results. Also replace the
nozzle if it becomes loose or no longer clicks onto the handle.
2 Open the cover of the reservoir ('click') (Fig. 5).
3 Fill the reservoir with mouthwash or water (Fig. 6).