Maintenance And Care; Spray Arms - Bosch SHV58E UC Serie Guide D'utilisation

Maintenance and care

A regular inspection and maintenance of your machine will help to prevent faults.
This saves time and prevents problems.
Overall condition of the machine
Check spray arm for grease and limescale deposits.
If you ind such deposits:
• Fill detergent dispenser with detergent.
• Start the appliance without utensils in the cycle with the highest rinsing
temperature (see page 13 for cycle temperatures).
• Clean the appliance with detergents/appliance cleaners which are particularly
suitable for use with dishwashers.
• Regularly clean door seal with a damp cloth.
Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance with a damp cloth; water and a little liquid
soap are adequate. Do not use sponges with a rough surface or abrasive deter-
gents, as these could scratch the surfaces.
Stainless steel appliances:
Filters
The ilter system consists of a coarse ilter, a lat ine ilter and a microilter.
The ilters keep large foreign objects in the rinsing water away from the pump.
Foreign objects may occasionally block the ilters.
Check the ilters for residue by:
• Unscrew ilter cylinder as illustrated at top right and take out ilter system.
• Remove any residue and clean ilters under running water.
• Reinstall ilter system in reverse sequence and ensure that the arrow marks are
opposite each other after closing the ilter system.

Spray arms

Limescale and contaminants in the rinsing water may block nozzles and bearings
on the spray arms.
Check outlet nozzles on the spray arms for blockages by:
• Unscrew the upper spray arm.
• Remove the lower spray arm.
To prevent corrosion, avoid using sponge cloths.
1
2
18