Installing The Reliseal V 525 - HellermannTyton Reliseal Mode D'emploi

6 Position the cable gland nuts on the cable and assemble.
f Ensure that the thread is aligned towards the cable joint.
Assembling the cable gland nuts.
7 Attach the cable gland nuts to the cable joint.
f Twist the cable gland nuts firmly onto the cable joint.
Attaching the cable gland nuts.
; The product has been successfully installed.

5 .3 Installing the Reliseal V 525

Proceed as follows:
1 Strip the cable as shown in the figure and align the
cores.
20 mm 60 mm
Stripping the cable.
2 Depending on the cable diameter, insert or remove the
adapter seals in the cable joint.
Inserting the adapter seals.
f Select the adapter seals for the corresponding cable
diameter.
Ø20 - 23 mm
Ø24 - 30 mm
Selecting the adapter seals.
Installation instructions • Reliseal • 07-2016
Installation
20 - 30 mm
3 x 10 - 5 x 25 mm²
9