U.S.Robotics 5661A Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Connect to your Internet service provider. At the Installation CD-ROM interface, click Support
and then click Registration and Warranty. Click the link to register your modem. You can also
register your modem online at
http://www.usr.com/productreg
Uninstallation Instructions
Step 1: Uninstall the modem drivers.
Windows 95/98/Me
Click Windows Start, Settings, and then Control Panel.
Double-click Add/Remove Programs.
Select U.S. Robotics V.92 PCI Modem and click Add/Remove.
Click Yes.
Click OK.
Windows 2000
Click Windows Start, Settings, and then Control Panel.
Double-click Add/Remove Programs.
Select U.S. Robotics V.92 PCI Modem and click Change/Remove.
Click Close.
Windows XP
Click Windows Start and then Control Panel.
Double-click Add or Remove Programs.
Select U.S. Robotics V.92 PCI Modem.
Click Change/Remove.
Click Close.
Step 2: Finish removing the modem from the computer.
CAUTION: To avoid the risk of electrical shock, make sure your computer and all
peripheral devices are turned off and unplugged. Disconnect all telephone cables from
any existing modems before opening the computer's cover. Touch an unpainted metal
area of your computer's case to ground yourself, which protects your equipment from
electrostatic discharge.
Turn off your computer and all peripheral devices. Unplug your computer and disconnect all
telephone cables from any modems. Remove the computer's cover. Remove the modem from the
PCI expansion slot.
Troubleshooting
If you have any difficulty with your modem, first make sure that it was
installed correctly.
1.
Make sure that your modem is physically installed correctly in your computer. With your
computer turned off, you will need to press the modem in firmly so that it is seated properly
in its slot. When the modem is installed correctly, you will no longer see any part of the gold
edge. See Step 1 in this guide for complete instructions. If your modem still does not work,
turn off your computer, remove the modem, and reinstall it in another PCI slot.
6

Publicité

Table des Matières
loading

Table des Matières