U.S.Robotics 5661A Mode D'emploi page 38

default to V.34 (33.6 Kbps). There may also be impairments on the local lines between your
ISP and your modem. These impairments can prevent or limit V.92 or V.90 connection
speeds. All telephone calls are routed differently, so you should try making your connection
several times. One way to test this is to dial into a long distance location. Long distance
lines are often much clearer than local lines. It is important to note that telephone
companies are constantly upgrading their systems. Lines that do not support 56K today may
support 56K in the near future.
• Your modem must be connecting to a V.92 or V.90 server. A pair of 56K modems will not
connect to each other at 56K speeds.
Support Resources
If you have not fixed your problem after trying the suggestions in the "Troubleshooting" section,
you can receive additional help via one of these convenient resources:
World Wide Web
The U.S. Robotics Web site contains useful product information, documents, downloads, and
updated FAQs.
http://www.usr.com/support
Are You Still Having Problems?
1. Contact the dealer who sold you the modem.
The dealer may be able to troubleshoot the problem over the phone or may request that you
bring the modem back to the store for service.
2. Contact the U.S. Robotics Technical Support Department.
Questions about U.S. Robotics modems can be answered by technical support specialists.
Country Voice
UK 0870 844 4546
Italy 848 80 9903
CE Compliance
We, U.S. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 60173-5157 USA, declare under our sole responsi-
bility that the product, U.S. Robotics V.92 PCI Faxmodem, Model 5661, to which this declaration relates, is in conformity with the
following standards and/or other normative documents.
EN60950
EN55022
EN55024
We hereby declare that the above named product is in compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC has been fol-
lowed.
Network Compatibility Declaration
This equipment is designed to work satisfactorily on all European Union PSTN networks.
This equipment is supplied with a suitable PSTN connector for the country in which it was supplied. If it is required to use this
equipment on a different network to the one for which it was supplied, the user is advised to contact the vendor for guidance
regarding connection.
FRS Europe BV.
Draaibrugweg 2
1332 AC Almere
The Netherlands
Online
uk_modemsupport@usr.com
italy_modemsupport@usr.com
10
Support Hours
9:00 A.M. – 5:30 P.M., M-F CST
9:00 A.M. – 6:00 P.M., M-F CST