Nordson ProBlue P4 Manuel page 156

Continued from previous page....
Is the standby LED on?
-
+
The melter is in the standby
mode.
Refer to Section 4, Standby
Key.
Is the ready delay counting down?
-
+
Wait for the ready delay to
count down.
Refer to Appendix B,
parameter 4.
T.3
Starting conditions:
No faults >
Ready LED is not illuminated
Confirm that the tank heater
has failed and replace the tank.
Tank - P/N 1018379.
Refer to DP.5.