Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
2
3
IN
IN
IN
O U T
O U T
O U T
The connection between the output of master and input of product, it's available to use the 3 pins
XLR cable which provided by the manufacturer. Signal cable from the DMX output of the controller
to the input of the first master light, and connect to the DMX input of second slave light from the
DMX output of the first master light, analogously, till connected all the slave lights, and insert the
last connector to the output of the final light. (Notice: the diameter of core of every cable should
be 0.5mm at least, double core shelter cable should be used).The signal connecting must use the
attached 3 pins XLR cable. Notice, all the internal lead wire of the 3 pins XLR cable should not touch
to each other or connect to the connector.
DMX signal terminator is recommended on the last unit of the chain.
DMX terminator is a XLR connector with a 120Ω resistor between the pin
2 and pin 3 of the XLR connector
FEATURES
• High precision optical lens
• 12 DMX channels
• 12 colors + white
• 11 fixed gobo's + blank
• Rotating 8-face prism
• Auto, sound, DMX512 & master-slave mode
• Linear dimmer 0-100%
• Electronic ballast
SPECIFICATIONS
Power supply: ........................................................................................ 90-245V~, 50/60Hz
Consumption: ................................................................................................................. 143W
Lamp Source: ................................................................................. OSRAM SIRIUS HRI 100W
LUX@5M ........................................................................................................................ 70000
Color Temperature: ....................................................................................................... 9000K
Average Lamp Life: ........................................................................................................6000H
Color: ........................................................................................ 12 colors +blank color wheel
Gobo: ............................................................................................. 11 fixed gobo + blank gobo
Prism: ........................................................ rotation 8-face prism. With prism positioning.
Lens: ....................................................................................High precision glass optical lens
Dimmer: ........................................................................................ 0-100%linear adjustment
Movement: Pan/Tilt: ........ X axis 540° ,Y axis: 250° automatically accurate positioning
Control mode: ............................. Standard DMX512, Automatic and Master/slave mode
Channels: ........................................................................................................................ 12CHs
Dimensions: ........................................................................................................ 31x23x39cm
Net weight: ........................................................................................................................ 9kgs
EN
4
© Copyright LOTRONIC 2020
Publicité
Table des Matières
