afx light BEAM1R-MKII Manuel D'utilisation page 12

CLEANING AND USING FREQUENCY OF PRODUCT
Please make sure that the light is power off before dismantling or maintaining, it's very important
to keep the light clean. Frequent cleaning will ensure maximum brightness output, but also prolong
the life time. It's suggested to use the high quality, professional glass detergent and soft cloth to
clean the light. It's not allowed to use alcohol or chemical solvent. The inner part of the light should
be cleaned by vacuum cleaner at least once a year. When the light doesn't work, please check if the
fuse is burnt out or not. If it is, the same fuse should be replaced, find out the faulty and restart the
light. But please note the repair must be handled by professional.
If the light's lens damaged or broken, and should need change the new lens, if the bulb damaged
or have any deformation, make the light dim, it says that the bulb had run out of its life., should
change in time. There are 3 thermal protection devices, using for cut off the lights power when it is
heating. If the thermal protection device set up, and then need to check whether the fan is normal.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
EN 12 © Copyright LOTRONIC 2020