Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10
5
0
3.3 PRISM INSERTION - CHANNEL 8
BIT
EFFECT
128-255
PRISM INSERTED
0-127
PRISM EXCLUDED
3.4 PRISM ROTATION - CHANNEL 9
BIT
EFFECT
255
FAST ROTATION
......
......
192
SLOW ROTATION
191
SLOW ROTATION
......
......
128
FAST ROTATION
0-127
POSITION
3.5 PAN - CHANNEL 1
3.6 PAN FINE - CHANNEL 2
3.7 TILT - CHANNEL 3
3.8 TILT FINE - CHANNEL 4
3.9 LAMP CONTROL & RESET - CHANNEL 12
BIT
EFFECT
200-255
COMPLETE RESET
150-199
PAN/TILT RESET
100-149
Reset small motors
80-99
UNUSED RANGE
60-79
LAMP OFF
40-59
Lamp ON
0-39
UNUSED RANGE
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Fur-
ther instructions depending on the installation spot and usage have to be adhered to by a skilled
installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use
alcohol or solvents.
CAUTION: Disconnect from mains before starting maintenance operation!
GOBO 2
GOBO 1
WHITE
Remark
Reset is activated passing through the unused
range and staying 5 seconds.
Lamp switch passing through the unused
range and staying 5 seconds.
www.afx-light.com
11
EN
Publicité
Table des Matières
