Remote Control - GE AJCQ06LWH Manuel D'utilisation Et Instructions D'installation

Using the Air Conditioner - Controls
Appearance may vary.
1. POWER
Turns air conditioner on and off.
2. DISPLAY
Displays the temperature setting.
3. MODE
HEAT (on some models), COOL, FAN, ECO,
or DRY modes. Indicator lights on the controls will show
the mode selected.
4. TEMP INCREASE (+) / DECREASE (–) PADS
COOL, ECO, or DRY modes.
To ensure proper operation, aim the remote control at
the signal receiver on the air conditioner.
The remote control signal has a range up to 21 feet.
The remote control will control the unit even if
connected to the Wi-Fi.
4
Air Conditioner Controls
• Lights below the touch pads on the control panel indicate
the selected settings

Remote Control

5. FAN SPEED
HIGH. Indicator lights will show the speed selected.
6. FILTER
Monitors accumulated fan run time as a reminder to clean
the filter.
7. WI-FI
This unit is GE Appliances Wi-Fi Connect Enabled.
8. SLEEP
Allows room temperature to increase in Cool mode or
decrease in Heat mode during sleeping hours.
Make sure nothing is between the air conditioner and
the remote control that could block the signal.
Make sure the battery is fresh and installed correctly—
see the Care and Cleaning section.
AUTO, LOW, MEDIUM, or
49-5000492 Rev. 4