Mitsubishi Electric CITY MULTI PAR-33MAA Mode D'emploi page 46

4
Manual vane angle
Select:
Outlet
F1
Manual vane angle
46
Angle
F2 F3 F4
Setting
The current vane setting will appear.
Select the desired outlets from 1 through 4 with
the F1 or F2 button.
Outlet: "1," "2," "3," "4," and "1, 2, 3, 4, (all outlets)"
•
Press the F3 or F4 button to go through the
option in the order of "No setting (reset)," "Step
1," "Step 2," "Step 3," "Step 4," "Step 5," and
"Step 6."
Select the desired setting.
* Step 6 can only be set for one outlet.
Vane setting
No setting
Step 3
Draft
reduction
Press the SELECT button to save the settings.
A screen will appear that indicates the setting
information is being transmitted.
The setting changes will be made to the selected
outlet.
The screen will automatically return to the
previous screen when the transmission is
completed.
Make the settings for other outlets, following the
same procedures.
If all outlets are selected,
displayed the next time the unit goes
into operation.
Navigating through the screens
• To return to the previous screen ...... RETURN button
Step 1 Step 2
Step 4 Step 5
All outlets
will be