Mitsubishi Electric CITY MULTI PAR-33MAA Mode D'emploi page 39

3
Auto return
Cool: After
back to
Heat: After
back to
Select:
Cursor
F1 F2
4
Auto return
Cool: After
back to
Heat: After
back to
Select:
Cursor
F1 F2
Auto return
Cool:
Heat:
Changes saved
Main menu:
Timer or Preset temperature settings will not be effective when the temperature range is
restricted and when the system is centrally controlled (when the temperature range setting
from local controller is prohibited). When the system is centrally controlled (when timer
operation from local remote controller is prohibited), only the timer setting will be ineffective.
Auto return
No / Yes
min
min
Cursor
F3 F4
Auto return
No / Yes
min
min
Content
F3 F4
Auto return
Yes
min,
min,
The screen to make the settings for the
automatic return to the preset temperature will
appear.
Move the cursor to the desired item with the F1
or F2 button out of "Auto return," "Cool," or
"Heat."
Change the settings with the F3 or F4 button.
Auto return: No (disable)/Yes (enable)
•
Cool: Timer setting range is 30 to 120 minutes
•
in 10-minute increments.
Temperature setting range is 19 to 30ºC
(67 to 87ºF) (1ºC increments).
Heat: Timer setting range is 30 to 120 minutes
•
in 10-minute increments.
Temperature setting range is 17 to 28ºC
(63 to 83ºF) (1ºC increments).
Press the SELECT button to save the settings.
"Cool" includes "Dry" and "Auto Cool" modes,
and "Heat" includes "Auto Heat" mode.
The screen to set the selected item will appear.
Navigating through the screens
• To go back to the Main menu ........... MENU button
• To return to the previous screen ...... RETURN button
39