Manual Vane Angle - Mitsubishi Electric CITY MULTI PAR-33MAA Mode D'emploi

Controller operation-Function settings

Manual vane angle

Button operation
1
Main
Maintenance
Initial setting
Service
Main display:
Cursor
F1
2
Maintenance menu
Auto descending panel
Manual vane angle
3D i-See sensor
Main menu:
Cursor
F1
3
Manual vane angle
Ref. address
Unit No.
Identify unit Check button
Input display:
Cur.
F1
Main menu
Page
F2 F3 F4
F2 F3 F4
Address Check
F2 F3 F4
Select "Maintenance" from the Main menu (refer
to page 20), and press the SELECT button.
Select "Manual vane angle" with the F1 or F2
button, and press the SELECT button.
Move the cursor to "Ref. address" or "Unit No."
with the F1 button to select.
Select the refrigerant address and the unit
number for the units to whose vanes are to be
fixed, with the F2 or F3 button, and press the
SELECT button.
• Ref. address: Refrigerant address
Unit No.: 1, 2, 3, 4
•
Press the F4 button to confirm the unit.
The screen at left shows a sample display on Mr. Slim. On
CITY MULTI units, "M-NET address," is displayed instead
of "Ref. address", and the "Unit No." will not be displayed.
OFF
Main
45