Mitsubishi Electric CITY MULTI PAR-33MAA Mode D'emploi page 42

4
Mon Tue Wed Thu Fri Sat Sun
No.
Input:
day
F1
5
Mon
No.
Select:
Cursor
F1
Mon
Day selection:
Room
Cool
Mode
42
Energy saving
-
-
-
-
Select
F2 F3 F4
Energy saving
-
-
-
-
Content
F2 F3 F4
Energy saving
Changes saved
Fri
Set temp. Auto
Temp. Fan
The setting change/day of the week selection
screen will appear.
Up to four operation patterns can be set for each
day.
Move the cursor to the desired day of the week
with the F1 or F2 button, and press the
F3 button to select it. (Multiple days can be
selected.)
Press the SELECT button to go to the pattern
setting screen.
The pattern setting screen will appear.
Press the F1 button to move the cursor to the
desired pattern number.
Move the cursor to the desired item with the
F2 button out of the start time, stop time, and
energy-saving rate (arranged in this order from
the left).
Change the settings with the F3 or F4 button.
Start/Stop time: settable in 5-minute increments
•
* Press and hold the button to rapidly advance
the numbers.
Energy-saving rate: The setting range is 0%
•
and 50 to 90% in 10% increments.
Press the SELECT button to save the settings.
A confirmation screen will appear.
The lower the value, the greater the energy-saving effect.
will appear on the Main display in the Full
mode when the unit is operated in the energy
saving mode.
Navigating through the screens
• To go back to the setting change/day of the week
selection screen ............................. SELECT button
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button