Getting Connected - Samsung RF23HC Série Manuel D'utilisation

The E-Smart Icon
The E-Smart icon lets you can check the status
of the refrigerotor's AP connection (network
connection).
• When connected to an AP: The E-Smart icon
is on.
• When not connected to an AP: The E-Smart
icon is off.
E-SMART Refrigerator Features
How to get the most out of your E-Smart
refrigerator.

Getting Connected

To use the Smart Grid (Demand Response) and
E-Smart function of Refrigerator, the following
devices must be properly installed or services are
activated. [AP (Access Point), Smartphone (Galaxy
S4, Galaxy Note3), Samsung E-Smart Smartphone
App, Samsung E-Smart Refrigerator]
• Both the Smart Grid (Demand Response)
and the E-Smart functions are enabled
only when an internet connection is
made as provided by the AP (Access
Point) and the ISP (Internet Service
Provider).
• In addition, the Smart Grid (Demand Response)
function is enabled only if you registered to the
DR (Demand Response) service of an electric
company, and the refrigerator is connected to
a device such as EMS that supports the SEP
protocol.
Downloading the E-Smart App and
Connecting the Refrigerator to your
Network
1. On your Smartphone, connect to the app store
(e.g. Google Play, etc.).
2. Search for the app using "Samsung E-Smart
Ref." as the keyword.
3. Download the app and install it on your phone.
4. Launch the app, The network configuration
screen appears.
5. Configure the AP information (SSID, Password,
etc.) on the app screen.
6. Configure the network settings according to the
DA68-02954A-00.indb 23
instructions in the app.
7. On the refrigerator, press and hold the the
Fridge and Energy Saver buttons at the same
time for 3 seconds. The refrigerator enters the
AP mode.
8. If you have completed the network settings
properly, the app shows the home screen.
• Please confirm your the Internet devices (AP,
Smartphone) are working properly before
configuring the network settings.
- This refrigerator supports the IEEE 802.11
a/b/g/n protocols.
Samsung Electronics recommends IEEE
802.11n.
- To connect the refrigerator to a wireless
network, you have to connect the refrigerator to
an AP (router or modem).
If the AP supports DHCP, you can connect the
refrigerator to the Internet using DHCP or a
fixed IP address.
- Set the channel of the AP to one not currently
being used.
If the channel set for the AP is being used
by another device nearby, it may result in
interference.
- Most wireless networks allow you to configure
network security settings.
If your network has a security password, you
must enter the password to connect to the
network.
• The refrigerator supports the following wireless
security modes and encryption types:
- Security Mode: WEP, WPAPSK, WPA2PSK
- Encryption Type: WEP, TKIP, AES
(WPA2PSK and AES are recommended.)
• The app supports indoor control only.
• The Samsung E-Smart Ref. app is optimized
for Samsung Electronics Smartphones (Galaxy
S4 , Galaxy Note 3).
For other Smartphones, some functions may
work differently.
English - 23
13. 11. 26. 10:46