Setting Up Your Side-By-Side Refrigerator; Getting Ready To Install The Refrigerator - Samsung RS30GKASL Manuel

setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy
the many state-of-the-art features and effi ciencies
that this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to a water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level)
flooring.
• Select a location with enough space for the
refrigerator doors to open easily. See the diagram
below.
• Select a location that allows sufficient space to
the right,left, back, and top for air circulation. See
the diagram below.
• Select a location that allows you to move the
refrigerator easily if it needs maintenance or service.
50mm 50mm
50mm 50mm
at least 6mm at least 6mm
1727mm 1727mm
All manuals and user guides at all-guides.com
When moving your refrigerator
To prevent fl oor damage, be sure the front levelling
legs are in the up position (above the fl oor). Refer to
'Levelling the refrigerator' in this manual (page 9).
To protect the fi nish of your fl ooring while you are
installing the refrigerator, place a large section of the
cardboard carton under the refrigerator where you
are working.
CAUTION
at least 6mm at least 6mm
Leg Leg
When installing, servicing or cleaning behind
the refrigerator, be sure to pull the unit straight
out and push back straight in after fi nishing.
Screw Driver Screw Driver
setting up _07