Monacor security TVCCD-1602COL Mode D'emploi page 19

white balance can either be set for a fixed colour tem-
perature (setting "3100K" for artificial light, setting
"5100K" for daylight) or made manually (setting
"MANUAL"). With "MANUAL" selected, the red contri-
bution (line "R-ADJUST") and the blue contribution
(line "B-ADJUST") can each be set with the button "N"
or "F" in steps from 0 to 20: The higher the value, the
more intense the corresponding colour tone.
"EXIT": exiting the OSD menu
To exit the OSD menu, press the menu button (2).
7.2 Submenu "SPECIAL"
SPECIAL
DZOOM ::ON
"
NEGA ::OFF
COLOR ::ON
MIRROR ::OFF
BRIGHTNESS ::10
SHARPNESS ::10
OSD ::ON
PREVIOUS ::ENTER
"DZOOM": Digital zoom on / off
Use the button "N" or "F" to activate ("ON") or deactivate
("OFF") the digital zoom (see chapter 6.1 "Zooming").
Submenu
"NEGA": Negative picture on / off
Use the button "N" or "F" to select the normal positive
picture ("OFF") or the negative picture ("ON"). With the
negative effect, bright and dark are reversed and
colours are reversed to their complementary colours.
"COLOR": Black-and-white / colour picture
Use the button "N" or "F" to select B / W picture ("OFF")
or colour picture ("ON").
"MIRROR": vertical mirroring of the picture
Use the button "N" or "F" to select "OFF" (normal pic-
ture), "HALF" (one half of the picture is mirrored so that
a symmetric picture results), and "FULL" (mirror-invert-
ed display of the complete picture).
"BRIGHTNESS": Brightness setting
"SHARPNESS": Sharpness setting
Brightness and sharpness can each be set in steps
from 0 to 20 with the button "N" or "F": The higher the
value, the brighter or sharper the picture.
"OSD": Display of the zoom factor on / off
When zooming, the camera can be set in such a way
that the zoom factor is displayed on the screen ("ON")
or not ("OFF").
"PREVIOUS": Return to the main menu
To return to the main menu, press the menu button (2).
GB
19