Safety Notes; Applications - Monacor security TVCCD-1602COL Mode D'emploi

GB 10 Adapter with thread jack [6.3 mm (
mounting the camera
11 BNC video output for routing the video signal as com-
posite colour signal
12 Hosiden video output for routing the video signal as
S-video signal (S-VHS signal)

2 Safety Notes

The camera corresponds to the directive for electromag-
netic compatibility 89 / 336 / EEC.
The camera is suitable for indoor use only. For outside
installation, the camera must be mounted into a weath-
erproof outdoor housing. Protect the camera against
intensive vibration, humidity, and heat (admissible
ambient temperature range 0 – 40 °C).
For cleaning the housing only use a dry, soft cloth;
never use chemicals or water.
Never touch the lenses of the lens assembly with your
fingers. For cleaning only use specific cleansing agents
for optical lenses.
No guarantee claims for the camera or liability for any
resulting personal damage or material damage will be
14
1 accepted if the camera is used for other purposes than
/ ") thread] for
4
originally intended, if it is not correctly connected, oper-
ated, or not repaired in an expert way.
If the camera is to be put out of operation definitively,
take it to a local recycling plant for a disposal which is
not harmful to the environment.

3 Applications

The colour camera TVCCD-1602COL is specially designed
for use in CCTV surveillance systems. It is equipped with a
motor zoom lens which allows to zoom in a picture detail
up to 22-fold magnification. This magnification factor can
once again be increased ten times via a digital zoom func-
tion (to be deactivated). Via an OSD menu, the camera
offers extensive adjusting possibilities, e. g. autofocus or
manual focus, shutter and white balance, SDR (super
dynamic range) on/off, negative or mirror-inverted picture
display, etc.
For convenient control of the camera, the optional
remote control RMA-1602 (fig. 2) is available. All settings
concerning zoom, focus, and menu can be made via the
remote control.