Monacor security TVCCD-1602COL Mode D'emploi page 17

6.1 Zooming
The camera is equipped with a 22-fold motor zoom. If
zooming is continued beyond the 22-fold magnification,
the digital zoom range is reached where the maximum
motor zoom factor can once again be increased ten times.
The digital zoom can be deactivated via the OSD menu
(see chapter 7.2, setting "DZOOM").
For zooming, actuate the corresponding zoom button (1):
button "W" (wide angle): reduction of the focal length
The angle of view is wider; the object to be monitored
is zoomed out.
button "T" (tele): extension of the focal length
The angle of view is reduced; the object to be moni-
tored is zoomed in.
As long as the button is pressed, the corresponding zoom
factor will be displayed on the screen, e. g. "ZOOM X004"
for a 4-fold zoom (provided that the setting "OSD" has
been activated in the OSD menu, see chapter 7.2).
6.2 Manual focus setting
The focus setting can be made automatically or manually.
As a basic setting, autofocus is activated.
1) To change between autofocus and manual focus it is
possible to
either activate the corresponding focus setting in
the OSD menu (see chapter 7.1, menu item "FOCUS")
or – for a quick change-over – switch between the
two settings with the button "AF / MF" (5) or press the
button "A / F" for autofocus (5a) or "M/F" (5b) for manu-
al focus on the remote control RMA-1602. After actua-
tion of the button, the screen will display the focus set-
ting selected ("AF" or "MF") for 7 s.
2) If "manual focus" is activated, set a sharp picture with
the focus buttons (3):
button "N" (near): focussing of objects nearby
button "F" (far): focussing of objects far away
7 Settings via the OSD Menu
For recalling the OSD menu, press the menu button (2).
The menu consists of two pages: the main page "MENU"
and the submenu page "SPECIAL". The buttons "W" and
"T" (1) are used to select the individual menu items, the
buttons "N" and "F" (3) to modify the menu settings.
The OSD menu will automatically disappear if no but-
ton is actuated for 7 s after the last actuation of a button.
GB
17