Illuminate For Connection Of Wired Controller And Indoor Units Network; Installation Of Outdoor Unit; Dimension Of Outdoor Unit And Mounting Hole - Gree FGR40Pd/D2Na-XI Manuel D'utilisateur

2.6.3 Illuminate for Connection of Wired Controller and Indoor Units Network

(1) Communication wire of indoor unit and outdoor unit (or indoor unit) is connected to D1,
D2.
(2) Wired controller is connected to H1, H2.
(3) One indoor unit can connect two wired controllers that must be set as master one and
slave one.

3 Installation of Outdoor Unit

NOTES
Graphics here are only for reference. Please refer to actual products. Unspecified
dimensions are all in mm.

3.1 Dimension of Outdoor Unit and Mounting Hole

Unit Outline and Installation Dimension（mm）
Model
FGR20Pd/DNa-X(O)
FGR25Pd/DNa-X(O)
FGR30Pd/DNa-X(O)
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
The Ducted Split Type Air-Conditioning Units(Inverter Series) Installation and Operation Manual
940
940
940
Fig.16
A B
320
460
460
9
Unit: mm
C D
1430 632
1615 610
1615 610
E
350
486
486