Keylock; Specifications - JTS MONACOR INTERNATIONAL R-4TBM/5 Mode D'emploi

3.12 Key lock
The transmitter is provided with a key lock to
prevent inadvertent switch-off or operation
– Activating the lock –
1) Call up the lock function via the menu item

KeyLock

Keylock
ON
OFF
2) Press the button  to activate the key lock
(ON)
3) Press the button SET to save the setting
When a button is pressed, the following mes-
sage appears:
Press Set
for 2 Sec.
to unlock
keypad.
Notes:
1 When the key lock is activated and the menu is
deactivated, the symbol
2 The key lock can also be activated or deactivated
directly on the receiver R-4 / 5 via the REMOSET func-
tion (refer to the instruction manual of the receiver)
– Deactivating the lock –
1) Keep the button SET pressed for two seconds
until the menu
Keylock
ON
OFF
2) Press the button  to select the setting
and press the button SET to save the setting
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
18
Fig. 15
appears on the display
appears
KeyLock
Fig. 16
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®

4 Specifications

Carrier frequency range: 506 – 542 MHz
Frequency stability:
Transmission power (EIRP)
Low:
High:
REMOSET frequency:
Audio frequency range: 50 – 18 000 Hz
Low-cut filter:
Ambient temperature: 0 – 40 °C
Power supply:
Operating time:
Dimensions
(W × H × D):
Weight:
Microphone
connection:
1
4
2
3
Fig. 17 Microphone jack
1 = ground
2 = 5 V operating voltage for the microphone
3 = signal input
4 = impedance correction
OFF
Subject to technical modification
±0 005 %
10 mW
50 mW
2 4 GHz
80 Hz
2 (rech ) batteries
of size AA
> 20 h with
3400 mAh rech bat-
teries
62 × 170 × 23 mm
90 g
4-pole mini XLR jack