JTS MONACOR INTERNATIONAL R-4TBM/5 Mode D'emploi page 12

1
2
3
4
5
6
7
Overview
1 Transmitting antenna
2 Battery status LED; shows red when the bat-
teries are discharged
3 LED REMOSET: lights up for 5 seconds to
indicate that the REMOSET function trans-
fers settings from the receiver to the pocket
transmitter (
4 Contacts for a charging station
(e g model CH-2 or CH-8)
5 Button
to switch on / off and to exit a
menu / menu item
To switch on or to exit a menu (item), press
the button briefly
To switch off, keep the button pressed
for 2 seconds until the display indicates
Power OFF
12
Frequency
Group/Chan
Sensitivity
Attenuate
Low Cut
Remoset ID
Remoset
RF Power
Contrast
Light Time
Reset
KeyLock
Exit
R -4TBM
2
RFLo
G:1 C: 2
508.500 MHz
ID2
SET
0dB
UHF PLL Transmitter
chapter 3 7 1)
☞
Contents
1 Important Notes . . . . . . . . . . . . . . 13
2 Applications . . . . . . . . . . . . . . . . . 13
Fig. 1
Menu
2 .1 Conformity and approval . . . . . . . . . . . 13
3 Operation . . . . . . . . . . . . . . . . . . 13
3 .1 Inserting or replacing the batteries . . . . . . 13
3 .2 Operation with rechargeable batteries . . . . 13
3 .3 Connecting the microphone and
attaching the transmitter . . . . . . . . . . . 14
3 .4 Switching the transmitter on or off . . . . . . 14
3 .5 Settings via the menu . . . . . . . . . . . . 14
8
3 .6 Basic settings and reset . . . . . . . . . . . 14
9
3 .7 Setting the transmission frequency . . . . . . 15
3 .7 .1 REMOSET function . . . . . . . . . . . . . 15
3 .7 .2 Setting the frequency manually . . . . . . . 16
10
3 .7 .3 Selecting a frequency from a group . . . . . 16
4
3 .8 Adjusting the transmission power . . . . . . 16
11
3 .9 Adjusting the input sensitivity . . . . . . . . 17
12
3 .10 Low-cut filter . . . . . . . . . . . . . . . . 17
3 .11 Muting the microphone . . . . . . . . . . . 17
3 .12 Key lock . . . . . . . . . . . . . . . . . . . 18
4 Specifications . . . . . . . . . . . . . . . . 18
Overview of groups and channels . . . . . .35
Fig. 2
R-4TBM / 5
6 Unlock button to open the battery compart-
ment (7)
7 Battery compartment cover
8 Sliding switch to mute the microphone con-
nected
9 Microphone connection
(4-pole mini XLR jack)
10 Arrow buttons  and  to select a menu
item and to change settings
11 Button SET to call up the setup menu shown
in Fig 1 (keep the button pressed for 2 sec-
onds until the menu appears on the display)
To call up a menu item and to save a setting,
refer to chapter 3 5
12 Display, for details refer to chapter 3 4, Fig 3