Plug In Refrigerator; Move To Final Location - Dacor Discovery DYF42BIWS Instructions D'installation

Masquer les pouces Voir aussi pour Discovery DYF42BIWS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Connect the water supply line to the refrigerator.
NOTE: If the main water shutoff valve is behind the
refrigerator, a secondary water shutoff valve may be installed
in line with the water supply line at the front of the product.
B
A
A. Household water line
B. Nut (purchased)
C. Ferrule (purchased)
D. Coupling
6. Turn on the water valve and check all connections for leaks.

Plug in Refrigerator

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Set the control switch at top of cabinet to the OFF position.
2. Plug the refrigerator into a grounded 3 prong outlet.
Installation Instructions
D
C
F G
E
E. Bulb
F. Nut
G. Refrigerator water
tubing

Move to Final Location

WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT: To avoid floor damage, make sure the levelers are
raised (not touching floor) and refrigerator is on rollers before
moving.
1. Place the top of the cardboard carton or plywood under
refrigerator. Remove dolly.
2. Do not remove the film on the outside.
3. Move the refrigerator straight back and evenly into the
opening. Be sure the refrigerator side trims do not interfere
with the door opening. Also, be sure that the water tubing is
not kinked and the power cord is on top of the refrigerator.
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Discovery dyf48biws

Table des Matières