Kohler PRO 3.7 Manuel Du Propriétaire page 15

Accessory System
Accessory kits available for models in table below which includes custom kits consisting of legs,
handles, wheels, lifting kits — whatever you want, any way you want it.
Accessory System
Wheel Kit
Leg Kit
Lifting Kit
Wheelbarrow Handle Kit
Cord Management Kit
Hand Truck Handle Kit
Isolator Kit
Install Wheel Kit
Wheel Kit
Wheel Kit (Wheels and Legs)
Wheel Kit (4 Wheels)
NOTE: Tilt unit so fuel tank cap is upward to
ensure no fuel leakage.
37 590 01 Rev. F
PRO 3.7/ PRO 5.2/
3.7 E 5.2 E
● ●
● ●
● ●
● ●
● ●
● ●
● ●
KohlerPower.com
PRO 7.5 /
7.5 E GEN 5.0 WP 2.0
● ●
● ●
● ●
● ●
● ●
● ●
● ●
NOTE: A clamping device or an assistant to
hold assembly while installing kit will
make process easier.
Wheel kit includes 2 wheels and mounting
hardware to be installed opposite of engine
side. Wheel kit and leg kit are designed to
be installed together. 2 wheel kits can be
combined for a 4 wheel confi guration.
1. Place 4 screws into holes of frame.
2. Bring bracket of wheel under frame and align
screws with bracket holes.
3. Thread nuts to screws. Torque to 221 in. lb.
(25 N·m).
Install Leg Kit
Leg Kit
NOTE: Tilt unit so fuel tank cap is upward to
ensure no fuel leakage.
NOTE: A clamping device or an assistant to
hold assembly while installing kit will
make process easier.
Leg kit includes 2 legs and mounting hardware.
Leg kit and wheel kit are designed to be
installed together. 2 leg kits can be combined
for a 4 legged confi guration.
1. Place 4 screws into holes of frame.
2. Bring leg under frame and align screws with
leg holes.
3. Thread nuts to screws. Torque to 221 in. lb.
(25 N·m).
WP 3.0 TP 3.0
● ●
● ●
● ●
● ●
● ●
EN
●
●
●
●
●
15