Operating Noises; Using Suitable Induction Cookware - Samsung NE58 9560 Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Surface cooking

Operating noises

You may hear the following operational noises:
Cracking noises : You may hear a cracking noise when you are using cookware
made of two or more materials.
Whistling : A whistling noise occurs when both back burners are in use.
This is caused by vibrations. Whistling can vary depending on the weight or
material of the cookware or the type of food you are cooking. (Noise can be
reduced by using thicker cookware.)
Humming : You may hear a low humming when you set an element to a high
power setting. This sound is generated by energy transmission, and it will
disappear when cooktop is turned off.
Clicking : Electric switches are operating.
Hissing, Buzzing : You may hear a fan noise during cooktop/oven operation.
You may continue to hear it even after the cooktop/oven is turned off.
This is normal. The fan runs to cool down the temperature inside. It will
automatically shut off itself after a short period of time.
These noises are normal and do not indicate any defects.

Using suitable induction cookware

Suitability test
28 English
NE58K9560WS_AA_AC_DG68-00722A-07_EN.indd 28
Cookware is suitable for induction cooking
if a magnet sticks to the bottom of the
cookware and the cookware is labelled as
suitable by the cookware manufacturer.
Better pans produce better results
You can recognize good pots and pans by their bases. The base should be as
thick and flat as possible.
When buying new pots or pans, pay particular attention to the diameter of the
base. Manufacturers often give only the diameter of the upper rim.
Do not use pans which have damaged bases with rough edges or burrs. You
can scratch the ceramic cooktop permanently if you slide a pot or pan with a
damaged base across the surface.
When cold, pan bases are normally bowed slightly inwards (concave). They
should never be bowed outwards (convex).
If you want to use a special type of pot or pan, for example, a pressure cooker,
a simmering pan, or a wok, please follow the manufacturer's instructions.
Energy saving tips
You can save valuable energy by observing
the following points:
Right!
Wrong!
Wrong!
Always position pots and pans before
switching on the cooking zone.
Dirty cooking zones and pan bases
increase power consumption.
When possible, position lids firmly on
pots and pans so that the lids cover
them completely.
Switch the cooking zones off before the
end of the cooking time and use the
residual heat to keep food warm.
2019-01-21
11:26:30

Publicité

Chapitres

Table des Matières
loading

Table des Matières