Waring Commercial CB15 Serie Mode D'emploi page 8

6. Allow motor to come to a complete stop before
removing container. Never place the container on the
motor base or remove it from the motor base while
the motor is running.
7. Press the STANDBY button again to turn off the
blender.
8. Remove the container from the motor base and
empty the contents.
Wash and dry container after each use. See Cleaning
9.
and Sanitizing Instructions, starting on page 14.
Not for water-jet cleaning.
10.
11. The use of ear protection is recommended during
extended operating periods.
1. Before starting, make sure that the blender cord is
unplugged.
2. Position container assembly on
motor base so that it is firmly
seated and not tilting to one side.
Plug blender cord into outlet.
3. Put ingredients into container.
Always add liquid ingredients first, unless otherwise
specified in recipe. Do not fill above Max line. Place
cover securely on container and fasten the cover
clamps.
Press the STANDBY button to turn on the blender.
4.
Press the UP arrow or DOWN arrow. The initial time
will be 10 seconds.
CB15T/CB15TP OPERATION
8