Waring Commercial CB15 Serie Mode D'emploi page 16

NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,
TEMPERATURE OF WASHING SOLUTION AND RINSE WATER
MUST NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST
NOT EXCEED ONE-QUARTER CONTAINER FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth or
sponge dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on
motor base, and run on HI speed for one (1) minute.
Empty container. Dislodge any residual moisture from
blade assembly by placing empty container on motor
base and running on HI speed for two (2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing
solution for two (2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces
of motor base with a soft cloth or sponge dampened
with washing solution, rinse water, and sanitizing
solution. Prevent liquid from running into motor base by
wringing all excess moisture from the cloth or sponge
before using it.
DO NOT IMMERSE MOTOR BASE IN WASHING
SOLUTION, RINSE WATER OR SANITIZING SOLUTION.
2. Allow motor base to air-dry before using.
FOR LABORATORY AND INDUSTRIAL APPLICATIONS
For laboratory and industrial applications, a cleaning/rinsing/
sanitizing/drying schedule similar to that given above for
foodservice applications should be followed, except that
the cleaning, rinsing and sanitizing media used must be
modified as required to be consistent with the materials
being processed.
IMPORTANT
16