Waring Commercial CB15 Serie Mode D'emploi page 7

Once assembled, insert the
spigot into the adapter on the
jar and rotate clockwise until
the spigot completely stops
as shown in figure 5.
1. Before starting, make sure that the blender cord is
unplugged.
2. Position container assembly on
motor base so that it is firmly
seated and not tilting to one side.
Plug blender cord into outlet.
3. Put ingredients into container.
Always add liquid ingredients first, unless otherwise
specified in recipe. Do not fill above Max line. Place
cover securely on container and fasten the cover
clamps.
Press the STANDBY button to turn on the blender.
4.
Green LED will illuminate. For continuous operation,
press either the LOW, MED, or HIGH button. When
finished blending, press STOP. For momentary
operation, press the PULSE button; motor will run
on HIGH speed until the button is released.
NOTE: Your CB15 utilizes a Slow Start™ feature.
When pressing MED or HIGH, the unit will start in the
LOW position for 1 second and then switch to the
setting selected. This allows for a more even blending
of ingredients in container.
5. Always hold container with one hand when starting
and while blending. Never operate without jar lid
properly clamped in place.
CB15/CB15P OPERATION
7
fig. 5