Setting The Controls; Selecting A Wash Cycle - Inglis 355 Série Guide D'utilisation Et D'entretien

Setting the Controls

Selecting a wash cycle

Press a Cycle pad. (Normal wash, Light wash and Rinse - Wash Later share the same pad.)
Turn the Cycle Control knob to the desired cycle.
CYCLE
POTS-N-PANS
Double heated
POTS-N-PANS
washes for cleaning
of cooked-on or
baked-on foods.
• The water heats to 140°F (60°C) in
both washes.
• The water heats to 140°F (60°C) in
the final rinse.
NORMAL
Double wash for
normal, everyday
NORMAL
soiled loads. (The
EnerGuide label is
based on this cycle.)
• Select Hi-Temp Wash to heat water
to 140°F (60°C) in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
LIGHT
Single wash for
LIGHT
pre-rinsed or lightly
soiled loads.
• Select Hi-Temp Wash to heat water
to 140°F (60°C) in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
†
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control knob does
not move while water is being heated.
A " • " shows what each cycle includes
MAIN
WASH RINSE WASH
• • •
• •
•
CYCLE
TIME
RINSE DRY (Minutes)
• •
†
88
• •
72 †
• •
62 †
13