Fein MULTIMASTER FMM 250 Mode D'emploi page 8

EN
Intended use of the power tool.
This power tool is intended for commercial
or private use for dry sanding of small sur-
faces, corners and edges, for scraping, for
sawing thin steel sheet, wood and plastic
components using the application tools and
accessories recommended by FEIN.
Operation of the power tool off power generators.
Operate the power tool only off
a.c. generators with sufficient power
output that do not have any distortion of
the voltage curve.
Symbols.
Symbol Term, meaning
➤
Action
Do not touch the saw
blade.
General mandatory sign
Read documentation
Use eye-protection
Wear ear protection
Use dust mask
Use protective gloves
It is forbidden to dispose
of the product in the
unsorted household
waste.
This symbol confirms the certification of this product for the USA and
Canada.
8
M M FMM 250 / M
ULTI ASTER
With the respective accessories, the power
tool can also be used for polishing, cutting,
separating and as a rasp.
Operating the power tool
WARNING
off power generators
whose no-load speed exceeds the voltage
value on the type plate of the power tool is
prohibited.
Explanation
Action to be taken by the user
Danger of sharp application tools moving
back and forth.
Follow the instructions in the adjacent text!
Be absolutely sure to read the enclosed
documentation such as the Instruction
Manual and the General Safety Instructions.
Use eye-protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Worn out power tools and other electro-
technical and electrical products should be
sorted separately for environment-friendly
recycling.
M FMM 250 Q
ULTI ASTER