Fein MULTIMASTER FMM 250 Mode D'emploi page 3

M M FMM 250 / M
ULTI ASTER
For your safety.
Only carry out such operations with this
power tool as intended for by FEIN. Only
use application tools and accessories that
have been released by FEIN.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual, inclu-
ding the figures, specifications, safety regu-
lations and the signs indicating DANGER,
WARNING and CAUTION.
Please also observe the relevant national
industrial safety regulations.
Non-observance of the safety instructions
in the said documentation can lead to an
electric shock, burns and/or severe injuries.
This Instruction Manual should be kept for
later use and enclosed with the power tool,
should it be passed on or sold.
WARNING! Read all instructions.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distraction can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
M FMM 250 Q
ULTI ASTER
b) Avoid body contact with earthed or
c) Do not expose power tools to rain or wet
d) Do not abuse the cord. Never use the cord
e) When operating a power tool outdoors,
3) Personal safety
a) Stay alert, watch what you are doing and
b) Use safety equipment. Always wear eye
c) Avoid accidental starting. Ensure the
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
conditions. Water entering a power tool
will increase the risk of electric shock.
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
use common sense when operating a po-
wer tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power
tools may result in serious personal in-
jury.
protection. Safety equipment such as
dust mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
switch is in the off-position before
plugging in. Carrying power tools with
your finger on the switch or plugging in
power tools that have the switch on
invites accidents.
EN
3